Charging connector is JST-XH connector
Discharging connector is female Deans Ultra plug.
Discharging wires are AWG14 silicon wires
Pack Configuration: 2S1P
Nominal pack voltage: 6.6V (3.3V per cell)
Nominal pack capacity: 2300MAH
Fully-charged pack voltage: 7.2V (3.6V per cell)
Recommended cut-off voltage: 5V (2.5V per cell)
Minimum voltage: 4.0V (2.0V per cell)
Continuous Discharge (C): 30.0C
Continuous Current (A): 69.0A
Burst Discharge (C): 60.0C
Burst Current (A): 138.0A
Maximum Charge Rate (C): 4.0C
Maximum Charge Rate (A): 10.0A
These A123 packs are produced using new genuine A123 Systems ANR26650M1 and APR18650M1A cells with a nominal voltage of 3.3V.
Fast charge is possible using the appropriate charger. Please do not attempt to fast charge A123 battery packs using the balance tap as the balancing wires are not suitable for high currents.
These packs make great fast-charge receiver batteries.
Please note, if you intend to swap the Deans Ultra plug on this pack, please cut one wire at a time, to avoid shorting the pack!