The Jet Teng Models Viper 90mm oleo struts with electric brakes are designed to work with all JTM Viper 90mm models and retracts.  The oleo struts add shock absorbing functionality with scale like appearance.  The oleo struts will work with the JTM electric retracts.  The electric brakes give control for stopping on any surface.

OLEO STRUTS SPECIFICATIONS:

Wire Struts Collett: 4 mm

Wheel Axle Size: 4 mm

Main Strut Length: 5"/128mm from top of strut to bottom of wheel

Main Strut Length (from top of strut to axle): 3.95"/ 98mm

Nose Strut Length: 5.7"/ 145mm from top of strut to bottom of wheel

Weight: 5 oz. (Includes all three struts)

Wheel Diameter: Main- 2 5/8" (60mm)  Nose- 2" (52mm)

Plane Size: 90 mm edf jets or jets weighing 6 to 12 pounds

A pull-pull cable system will need to be purchased for the nose gear steering system.

Rubber tires for improved traction

ELECTRIC BRAKE SYSTEM:

The JTM electric energy control aircraft brake system is replacing and reshaping the traditional pneumatic braking system.  This will enable the builder and flyer to have an easier installation and better control on the distance of landing without adding extra flying weight.

The brake system operates on a input voltage of 7.4-22v.  It can be directly plugged into the aircraft battery or use an external battery from 7.4v.  Adjustment is easy to make by adjusting the capacity control clockwise to increase power and counter clockwise to reduce power on the hub screws.  The control box plugs into an auxilary port on the receiver.  The leads from the brakes in the wheels connect to the control box.

Set come with two main wheels and brake controller.

SPECIFICATIONS:

Operating Voltage - 7.4- 22v [see our 2s 1000mah lipos]

Main Wheel Diameter: 60mm / 2.36 Inches

Axle Screw Diameter: 4mm

Total Weight: 390g incl. E-brake controller

See these Brakes in action here: https://www.facebook.com/planecrazyrc/videos/405978286259394/