The Jet Teng Models Viper oleo struts with electric brakes are designed to work with all JTM Viper 120mm models and retracts. The oleo struts add shock absorbing functionality with scale like appearance. The oleo struts will work with the JTM electric retracts. The electric brakes give control for stopping on any surface.
Operating Voltage: 7.4 - 22v
Wire Struts Collett: 4 mm
Wheel Axle Size: 4 mm
Main Strut Length (top of strut to center axle): 153mm
Nose Strut Length: (top of strut to center axle): 173mm
Weight [all 3 incl. ecu]: 570g
Wheel Diameter - Mains: 70mm
Wheel Diameter - Steering - 59mm
A pull-pull cable system will need to be purchased for the nose gear steering system.
ELECTRIC BRAKE SYSTEM:
The JTM electric energy control aircraft brake system is replacing and reshaping the traditional pneumatic braking system. This will enable the builder and flyer to have an easier installation and better control on the distance of landing without adding extra flying weight.
The brake system operates on a input voltage of 7.4 - 22V. It can be directly plugged into the aircraft battery or use an external battery from 7.4v. Adjustment is easy to make by adjusting the capacity control clockwise to increase power and counter clockwise to reduce power on the hub screws. The control box plugs into an auxilary port on the receiver. The leads from the brakes in the wheels connect to the control box.
The tires are constructed of the same rubber that automobile tires are made of. This leads to improved traction upon landing and taxiing on the tarmac.
Set come with two main wheels and brake controller.
See these E-brakes in action here: https://www.facebook.com/planecrazyrc/videos/405978286259394/